We stand ready to help any customer in need. Our People First philosophy led us to suspend disconnects while our community bands together during this challenging time. If you are experiencing financial hardship, we urge you to contact us for help. Call us at 210-353-2222 or online at cpsenergy.com/assistance.

For the safety of our customers and employees, face coverings are highly suggested, but not required.  Please let us know if you need assistance.  Our modified customer service center hours are 10:30 a.m. to 5:00 p.m. Monday – Friday.  

Importance of Proper Grounding

 
Stock-102

The main reason for proper grounding is safety for your employees and equipment.

  • Personnel: for any person who may contact high voltages due to electrical fault
  • Equipment: ensures all equipment is protected in the event of a fault.
  • Noise Control: helps eliminate transients, which can cause issues ranging from insulation breakdown to equipment failure.

All ground rods, including metal water pipes, should be connected at the point where a building’s ground connections come together. These ground rods can be combined at the service entrance to decrease ground resistance.

In the event of a lightning strike, separate ground connections could endanger personnel and equipment.

If multiple neutrals are tied to grounds throughout your system, this could cause protection circuits to malfunction.

The service entrance is the only place where a ground should be connected to a neutral.

 

Typical Connection Problems:

Problem: Burning odor at a circuit breaker panel, J-box or outlet

  • Possible Cause: Bad connection, faulty conductor

Problem: Warm CB panel

  • Possible Cause: Bad circuit breakers or bad connections

Problem: Buzzing sound

  • Possible Cause: Arcing due to bad connection

Problem: Scorched or charred insulation.

  • Possible Cause: Wire or circuit overload, bad conductor or connector

Problem: No voltage

  • Possible Cause: Tripped breaker, blown fuse or broken conductor

Problem: Intermittent, inconsistent voltage

  • Possible Cause: Bad connection or arcing